web-archive-it.com » IT » E » ELAP.IT

Total: 388

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    port SD card slot The storable data structures with indexed access receipts allow to fit the configuration of the user interface to the most different application requirements The PLC can be programmed both in Ladder language and in Instruction list The graphical interface can be completely configured The wide Flash memory area of the microprocessor allows to store the graphical pages the user interface and the PLC program Technical specifications Control over 2 4 axes Embedded PLC Ladder or Instruction List programming languages Programming via the mini USB 2 0 port Real Time Clock Removable SD card data recipes and programs backup upload Main bus for I O expansion 32 inputs 32 outputs I O expansion modules up to 80 inputs 80 outputs 2 4 bidirectional count inputs 5V Line Driver RS422 with zero reference reading 240 x 128 pixel graphic display CPU 32 bit RISC Flash memory for data backup Modbus RTU communication protocol on two ports Inside board mounting version Nexus Box N2 with remote terminal available Related documents NEXUS N2 specifications Info Quotation Enquiries Products Absolute encoders Incremental encoders Linear transducers Wire transducers Linear potentiometers PLC axes controllers Nexus N2 2 4 axes Vega 1 2 axes

    Original URL path: http://www.elap.it/eng/index.php/plc-axes-controllers/nexus-n2-2-4-axes.html (2016-02-10)
    Open archived version from archive


  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    color display is rear lighted 4 2 inch wide with 432x240 pixel resolution and 65000 colours Its touch screen functions are easily set by means of a dedicated program VEGA controls one or two digital axes by means of its 12 bit analogue output and can run the automation of industrial machines and production systems VEGA mighty embedded PLC allows to configurate the controller thoroughly and to engineer complex applications in a direct and efficient way VEGA hardware specifications are consistent with VEGA prior version while its software was enhanced to handle the touch screen funcionalities VEGA PLC programs and tasks are compatible with VEGA applications Technical specifications Control over one or two digital axes Embedded PLC LADDER or Mnemonic programming languages Touch screen Interface completelyprogrammable via PC Main bus for I O expansion 16 inputs 16 outputs I O expansion modules up to 64 inputs 64 outputs Compatible with VEGA Modbus RTU communication protocol TFT COLOR DISPLAY Touch Screen 432 x 240 pixel 4 2 inch 65000 colours Related documents VEGA specifications Modbus Network Info Quotation Enquiries Products Absolute encoders Incremental encoders Linear transducers Wire transducers Linear potentiometers PLC axes controllers Nexus N2 2 4 axes Vega 1 2

    Original URL path: http://www.elap.it/eng/index.php/plc-axes-controllers/vega-plus.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    to configurate the graphical display with icons backgrounds and animation Thanks to the high protection degree on the front case IP65 VEGA can be used in severe industrial environments Technical specifications Control over 1 or 2 axes Embedded PLC LADDER or Mnemonic programming language Programmable user interface Graphical pages handled Main bus for I O expansion 16 inputs 16 outputs I O expansion modules up to 64 inputs 64 outputs

    Original URL path: http://www.elap.it/eng/index.php/plc-axes-controllers/vega-1-2-axes.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    of simple logic circuits The Integrated Development Environment Elap CmStudio allows to create the PLC program and to configure the user graphical interface Technical specifications Compact size Control over 1 PLC axis Embedded LADDER or Mnemonic programming language Programmable user interface Graphical pages handled Software programs available 6 inputs 6 outputs 128x64 pixel graphic display CPU 8 bit 4 MIPS Related documents NEOS N1 specifications Info Quotation Enquiries Products Absolute

    Original URL path: http://www.elap.it/eng/index.php/plc-axes-controllers/neos-1-axes.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    counters to the up to date microprocessor electronic counters with functions settable by the user All those who wish to replace the elderly counters series CM33 CM44 CM55 and CM60 as well as visualisers SD30 and SD31 and digital tachometers IG450 and IG455 wil surely find the suited instrument in this section Our technical staff will be glad to offer their advice on the matter The counters visualisers series CM78

    Original URL path: http://www.elap.it/eng/index.php/counters-and-visualizers/73-counters-a-visualizers.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    max frequency H2 with analogue output and H3 with ON OFF output and analogue input with high frequency A D conversion 1 KHz and 10 bit resolution input Versions with RS232 or RS485 serial port are also available allowing to connect CM78 to a PC or to a printer or point to point to other CM78 units Technical specifications 6 displayed digits or 5 digits with minus sign 2 preset values Supply voltage 115 or 230 or 24 Vac 50 60 Hz or 24 Vdc type H1 and H2 only H1 fast count input and 40 KHz max frequency H2 10Vdc differential analogue output H3 ON OFF output and analogue input with high frequency A D conversion KHz 10 bit resolution input Count input for NPN open collector signals 40 KHz direct count max frequency 2 normally open relay outputs 3 A max I 220 V max V 50 Hz 2 auxiliary inputs Operational modes freely settable by the user decimal digits correcting factor of the input pulses Serial interface RS232 or RS485 optional Data storage at turning off on EEPROM Removable terminal box connections Front dimension 48 x 96 mm depth H1 105 mm H2 H3 138 mm Possibility

    Original URL path: http://www.elap.it/eng/index.php/counters-and-visualizers/cm78.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    relative visualiser with two setpoints A list of freely settable parameters inputs outputs type operating cycle counting direction decimal point position multipying factor allows to tailor CM78N to several applications on industrial operating machines Functions and data are easlily entered via the front keys Technical specifications 6 displayed digits mono bidirectional input count frequency primary wave 25 KHz NPN or push pull encoder inputs 2 relay outputs 250V 3A 2 presets supply voltage 115 or 230 or 24Vac 50 60Hz or 12 or 24 Vdc to be defined in the order microprocessor with re writable memory Dimensions mm 96x48 dept mm 105 panel cut off mm 92x45 Operating modes can be freely set by the user Decimal point position correcting factor from 0 01 to 9 99999 multiplication of the input pulses by 1 or by 4 12 24 Vdc external functional inputs NPN or PNP selectable by software single or repeat cycle up or down counter for type C01 only solid state or time outputs partial total counter type C01 or absolute relative visualiser type C02 cycle counter type C01 only Operating modes CM78N C01 CM78N C02 Up down counter with settable cycle Position visualiser Partial total counter with

    Original URL path: http://www.elap.it/eng/index.php/counters-and-visualizers/cm78n.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    can be equipped with 2 relay outputs and two comparing alarms on the displayed variable The type VD4 LQ RQ2R with potentiometer input allows to display the position as absolute or relative value The user friendly interface simplifies the daily use of the instrument as well as the installing operation Technical specifications Supply voltage 24Vac or 115 230Vac 10 50 60 Hz 12Vdc 24Vdc Power requirement 4 VA max version 24 115 230Vac 2 5 Watt version 12Vdc 5 Watt version 24Vdc 4 digit 7 segment LED display 12 7 mm high Data and preset saving on FLASH memory Display range 9999 9999 Number of decimals 0 1 2 or 3 settable Working temperature O 45 C Input reading resolution 4000 steps Accuracy 0 2 of the input range Conversions per second 140 Relay contacts type Normally open 3A 250Vac Front case protection degree IP54 Available versions Vcc One voltage input channel Input range 2 Vdc 20 Vdc 200 Vdc Vcc2R One voltage input channel and 2 relay outputs Lq Input by potentiometer with resistance 1 20 KOhm Lq2R Input by potentiometer and 2 relay outputs Icc One direct current input channel Input range 20mA 200mA 2A Configured at factory

    Original URL path: http://www.elap.it/eng/index.php/counters-and-visualizers/series-vd4.html (2016-02-10)
    Open archived version from archive



  •