web-archive-it.com » IT » E » ELAP.IT

Total: 388

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    be coupled to rotary or linear potentiometers with resistive values ranging between 1 and 100 Kohm The value of the displayed measure can be adjusted from zero to the max scale range The readouts series VD3 Vcc can be combined with transducers providing direct voltage values proportional to the magnitude to be measured VD3 Vcc allows to modify the display mode according to the voltage detected as input It is possible to display direct voltage values ranging between 1 and 250 Vdc The display field can be chosen among three different solutions 3 digits 999 Readout type VD30 3 1 2 digits 1999 Readout type VD31 3 digits with steady zero 9990 Readout type VD300 The number of decimal digits can be preset The calibration is performed by means of a trimmer placed on the rear case the series named TF avails on a trimmer on the front case to adjust the scale range Technical specifications Supply 24 Vac or 115 230 Vac 10 50 60 Hz Current consumption 3 VA 7 segment display LEDs 12 7 mm high Decimal digits selectable A D conversion by double ramp integrator Readings second 3 Operating temperature 0 45 C Max relative moisture

    Original URL path: http://www.elap.it/eng/index.php/counters-and-visualizers/series-vd3.html (2016-02-10)
    Open archived version from archive


  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    via the front keyboard the key D allows reading of the preset values and the count record CM6 avails on 2 relay outputs with switching contacts and accepts input signals by micro switch inductor incremental rotary or linear transducers Data are saved on EEPROM Technical specifications Supply voltage 230 or 115 or 24Vac 50 60Hz 10 4VA Output of the transducer supply 12Vdc 5 max 70mA Count frequency 4KHz primary wave for amplified signals 30Hz for microcontacts Input sugnals by mono or bidirectional rotary or linear encoders or NAMUR inductors with NPN open collectors or by micro switch Outputs on 2 relays with 1 switch contact 250V 50A Data memory on EEPROM Reset Load on terminal box Connections by extractible terminal box accessible from rear Display high definition 7 segment display with 6 digits 3 LEDS signalling the count and preset phase Anti scratch polyester keyboard Dimensions mm 72x72x146 CM6 Main features can be set by means of a numerical code selection the count type up or down the count mode monodirectional x1 or x2 or bidirectional x1 x2 x4 or input by electro mechanical contact the operating cycle single with steady or settable time outputs repeat cycle with 1

    Original URL path: http://www.elap.it/eng/index.php/counters-and-visualizers/cm6.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    are easily set by means of a dedicated program VEGA hardware specifications are consistent with VEGA prior version while its software was enhanced to handle the touch screen funcionalities VEGA PLC programs and tasks are compatible with VEGA applications Technical specifications Control over one or two digital axes Embedded PLC LADDER or Mnemonic programming languages Touch screen Interface completelyprogrammable via PC Main bus for I O expansion 16 inputs 16

    Original URL path: http://www.elap.it/eng/index.php/positioners/vega-.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    the creation of the PLC program and of the user interface allows to configurate the graphical display with icons backgrounds and animation Thanks to the high protection degree on the front case IP65 VEGA can be used in severe industrial environments Technical specifications Control over 1 or 2 axes Embedded PLC LADDER or Mnemonic programming language Programmable user interface Graphical pages handled Main bus for I O expansion 16 inputs

    Original URL path: http://www.elap.it/eng/index.php/positioners/vega.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    Program Functions PLCNS 1001 Single axis positioner with analogue output manual shifts zero reference search semi automatic positioning automatic positioning blade thickness 10 recipes by 8 preset each and absolute relative value English version available PLCNS 1002 Single axis positioner with ON OFF output manual shifts semi automatic positioning automatic positioning blade thickness 10 recipes by 8 preset each and absolute relative value English version available Technical specifications Compact size

    Original URL path: http://www.elap.it/eng/index.php/positioners/neos.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    available for those systems which use two speed actuators in this case the accuracy of the positioning is assured by specific parameters allowing the speed change and stop with inertia of the system CM76 controls one axis positioning either as incremental system as relative or absolute system This characteristic makes CM76 ideal to solve the applications in the fiel of material progress such as in the sheet working sector e g punching boring shearing machines In order to communicate with external units CM76 can be equipped with a RS232 serial port the mini PLC implemented inside the instrument allows to choose among the wide range of available options the function of inputs outputs and F keys Technical specifications Supply voltage 115 230 or 24V 50 60 Hz 10 20 key antiscratch poliester keyboard 8 digit 7 segment display 2 LEDs signalling the system state Count input 10 KHz to be quadrupled 20 KHz to be doubled 40 KHz direct Analogue output 10V or 0 10V with direction contact 5 relay outputs l max 3A V max 220V Transducer supply 12V 4 auxiliary outputs NPN PNP selectable RS232 serial interface 9 pin standard connector outlet optional Data stored on EEPROM Count

    Original URL path: http://www.elap.it/eng/index.php/positioners/cm76-cm77.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    house a wide polycarbonate keyboard with well distinguishable keys The hardware versions also offer different solutions the type H1 with on off output H2 with analogue output and H3 with on off output and analogue input The versions identified by RX are provided with RS232 serial interface enabling to receive and transmit the positioning data from to an external source PC PLC process controllers or to connect point to point to other CM72 CM73 or CM74 units Technical specifications Supply voltage 230 or 115 or 24 V 50 60 Hz 10 Transducer supply output 12 Vdc 5 max 70 mA Count frequency 4 KHz primary wave 4 relay outputs type S P S T with max I 3A V max 220 Vac Analogue output 10 V 8 bit with deceleration ramp 2 auxiliary inputs accepting PNP or NPN signal selectable CURRENT LOOP serial input 20 mA passive or RS232 Transmissione protocol Data bit no 8 Stop bit no 1 Parity no one Transmission speed 1200 baud Data stored in EEPROM High definition display digit h 7 mm Antiscratch polyester keyboard Extractible terminal box accessible from rear Related documents CM 72 CM 73 CM 74 specifications Info Quotation Enquiries Dimensions CM

    Original URL path: http://www.elap.it/eng/index.php/positioners/cm72-cm73-cm74.html (2016-02-10)
    Open archived version from archive

  • Plc motion controllers, Position controllers and visualizers, digital position displays, absolute and incremental sensors, transducers and encoders
    Mr Salvadè Giancarlo Mr Salvadè Tiziano Ph 39 031 27 56 000 Fax 39 031 27 53 514 Email 1 This e mail address is being protected from spambots You need JavaScript enabled to view it Email 2 This e mail address is being protected from spambots You need JavaScript enabled to view it Products Absolute encoders Incremental encoders Linear transducers Wire transducers Linear potentiometers PLC axes controllers Counters and

    Original URL path: http://www.elap.it/eng/index.php/italian-agents/lombardy.html (2016-02-10)
    Open archived version from archive